Ditch the bungee cords. Your jug rides in hardened steel.
EZ JUG FLOOR MOUNT
No More Jug Rodeo in the Truck Bed.
Hardened steel for your EZ3 or EZ5. Angle the jug in, press it down, and it rides upright.
EZ Utility Jug Floor Mount
€27,95 EUR
Skip to product information
In stock
Secure Transport for EZ3 and EZ5 Jugs
EZ Utility Jug Floor Mount
“Secures the gas jug nice and tight. No more wedging my fuel jug in between the other stuff I’m hauling.”
Mike P.
€27,95 EUR
Pickup available at STKR Concepts (Troutman, NC)
Usually ready in 24 hours
What Sets It Apart
-
Hardened Steel – A steel frame that keeps the jug upright for the ride.
-
Fits EZ3 and EZ5 – One mount works with both jug sizes.
-
Angle In, Press Down – Locks the jug in with one move. Pull straight up to grab it.
-
Padlock Point – Lock the jug to the mount. Padlock sold separately.
-
Five Screws Included – Ready to fasten to a trailer, van, or truck-bed floor.
-
One-Year Warranty – Supported from the USA.
🛠️ Hank’s Tip: Mount it where you can grab the jug without climbing into the bed. Add a padlock and it handles the sticky fingers too.
🛡️ 1-Year Warranty • Supported from the USA
How to Install It
- Pick the spot. A flat floor in a trailer, van, or truck bed, somewhere you can reach the jug without climbing in.
- Fasten the mount to a solid floor with the five included self-tapping screws. A small pilot hole for each one makes them start clean. Going into wood? Swap in #8 x 1-inch flathead wood screws for a better grip. Snug every head down flat so nothing rubs the bottom of the jug.
- Angle the jug in and press it down until it seats in the mount.
- Add a padlock through the lock point when the setup needs to be secured.
- To grab the jug, take the padlock off if you used one and pull the jug straight up.
Don't mount it over a hot engine or near heat, sparks, or flame.
What's In The Box?
- (1) EZ Jug Floor Mount
- (5) self-tapping screws
The jug and padlock are not included.
Tech Specs (For the Detail Freaks)
EZ JUG FLOOR MOUNT - SKU 00399
- Construction: Hardened steel
- Fit: EZ3 and EZ5 Utility Jugs
- Fasteners: Five self-tapping screws, included
- If you use your own: #8 x 1-inch flathead wood or sheet-metal screws, or 3/16-inch flathead bolts
- Security: Padlock point (padlock not included)
- Warranty: 1 year
Shipping & Returns
Shipping & Returns
We move fast. You’ve got stuff to do.
Order Processing:
We ship Monday through Friday (weekends are for wrenching and recharging). Orders usually hit the road within 1–2 business days. If it’s a holiday, we’ll fire up the warehouse the next business day.
Shipping:
Spend $99+ and we’ll ship it free in the U.S.
Spend $149+ and we’ll even throw in a free in-cart gift, just ‘cause we like you.
Returns:
Not in love with it? Happens.
You've got 30 days to send it back in new condition. No hassle, no weird questions, just reach out and we’ll make it right.
One Steel Frame. Zero Bungee Cords.
Steel to hold it, a one-move install, and a lock point for when you walk away.
Hardened Steel, Not Hope and a Bungee
A hardened-steel frame cradles the base of your EZ3 or EZ5 so it rides upright in the trailer, van, or truck bed instead of sliding into the rest of your gear.
Angle It In. Press It Down.
No straps to thread and no knots to remember. Tilt the jug into the mount, press it down, and it’s seated. When you need it, pull straight up.
Lock It Up When You Walk Away
The lock point takes a padlock, so the jug stays with the truck while you’re at the track, the job, or the trailhead. Padlock sold separately.
Mount Owners Don’t Miss the Bungees.
From the race trailer to the work van, here’s what owners say after the first haul.
Peace of mind
No more strapping down the gas cans with a bungee and hoping it stays up. So easy and convenient. Locks in quick and gives me peace of mind.
Craig A.
Verified buyer
A few screws and done
...The base that holds it is awesome too. A few screws to attach to the floor and done.
Ethan S.
Verified buyer
No more sliding around
I practically live in my truck, so I like to keep it neat... didn't like the look of the bungee cords... I don't have to worry about them sliding around anymore!
Rick
Right by the side door
...I’ve got the Risk jug mounted in a new trailer right by the side door. So easy to grab from it’s bracket...
James M.
Stays put, stays yours
...I also love that u can put a small pad lock when using floor mount and don’t have to worry about the jug and contents getting stolen...
Todd J.
To and from the race
These Utility Jugs I bought are AWESOME, floor mount keeps them in place while heading to and from the race.
Jaden E.
Verified buyer
Very secure in the van
...being able to mount to my van is really awesome and very secure.
Brent H.
Verified buyer
Bought an extra mount
Bought the combo pack for my moto trailer. Worked well and loved the jug enough that I bought an extra mount for my work truck...
Jose 4.
What’s in the Box?
One hardened-steel mount and the five screws to put it down.
Your EZ Floor Mount Package Includes
- 1 EZ Jug Floor Mount
- 5 self-tapping screws
Full technical specs
Here’s the Nerd Stuff
The exact steel, hardware, and fit behind the EZ Jug Floor Mount.
Material
Hardened steel
Black finish.
Fit
EZ3 and EZ5
One mount for both sizes.
Hardware
5 self-tapping screws
Included, for metal floors.
Hole pattern
170.5 x 122.5 mm
About 6.7 x 4.8 in, center to center, corner holes.
Install
Angle in, press down
Pull straight up to remove.
Warranty
1 year
Supported from the USA.
Floor Mount Questions, Answered.
Fit, install, and security, before you buy.
Which jugs does it fit?
The EZ3 3-gallon and EZ5 5-gallon Utility Jugs. One mount works with both sizes.
Does it come with screws?
Yes. Five self-tapping screws come in the box for metal floors. Drill a small pilot hole for each. For a wood floor, #8 x 1-inch flathead wood screws grip better. Bolting through? Risk’s spec lists 3/16-inch flathead bolts.
Where can I mount it?
Any solid, flat floor: trailer, van, truck bed, even a boat deck. Skip soft or water-damaged wood, and don’t mount it over a hot engine or near heat, sparks, or flame.
How do I get the jug in and out?
Angle the jug into the mount and press it down. To take it out, pull straight up.
Can I lock it?
Yes. The mount has a lock point for a padlock, sold separately.
Do I need one mount per jug?
Yes, each mount holds one jug. Running two jugs? Grab two mounts.
Need a Jug to Go With It?
Every EZ package side by side. The Full Combos already have a Floor Mount in the box.
| FEATURES |
EZ3 Jug Only |
EZ3 + Hose |
EZ3 Full Combo |
EZ5 Jug Only |
EZ5 + Hose |
EZ5 Full Combo |
|---|---|---|---|---|---|---|
| Capacity | 3 gal / 12 L | 3 gal / 12 L | 3 gal / 12 L | 5 gal / 20 L | 5 gal / 20 L | 5 gal / 20 L |
| Hose Bender | Not included | Included | Included | Not included | Included | Included |
| Floor Mount | Not included | Not included | Included | Not included | Not included | Included |
| Best For | Compact jug foundation | Compact controlled pouring | Compact complete system | Maximum-capacity jug | Maximum-capacity pouring | Maximum-capacity complete system |
| Handles | Three | Three | Three | Three | Three | Three |
| Rear Breather | Adjustable | Adjustable | Adjustable | Adjustable | Adjustable | Adjustable |
| Transport Security | Add this Floor Mount | Add this Floor Mount | Snap-in, padlock-ready mount | Add this Floor Mount | Add this Floor Mount | Snap-in, padlock-ready mount |
Floor Mount Owners Speak Up
From the race trailer to the work truck, see why people are retiring their bungee cords.
Make Every Haul a Boring One.
Your jug rides upright in steel instead of rolling around with the gear.
Retire the Bungee Cords.
One hardened-steel mount for your EZ3 or EZ5, with five screws in the box.
★★★★★ “...No strapping cans down just lock it into the mount and done.” - Dominic V.
GEAR SHOULD WORK. SUPPORT SHOULD TOO.
Easy returns, a real warranty, fast shipping, and actual humans in North Carolina.
30-Day Returns
Ship it back, no hard feelings.
1-Year Warranty
If it breaks, we'll fix it.
Fast U.S. Shipping
Quick delivery. No guesswork.
U.S. Support Team
Real humans. No scripts.
